Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 38)

38 Publication ICM-UM001C-EN-E - March 2013
Chapter 3 Configure the Adapter
The Open dialog box opens.
2. Choose the ControlNet file that matches the existing network and click
Open.
3. From the Network menu, choose Online.
4. Check Edits Enabled.
When you enable edits, RSNetWorx for ControlNet software reads data
in the ControlNet modules and builds a schedule for the network.
5. Save the file.
The Save Configuration dialog boxopens.
6. Choose Optimize and rewrite schedule for all connections.
7. Click OK.
8. In RSLogix 5000 programming software, save the online project.