Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 21)

21 Publication ICM-UM001C-EN-E - March 2013
21
Chapter
3
Configure the Adapter
This chapter provides the steps required to configure the XM ControlNet
Adapter using ControlLogix®.
Use the Help Button Click Help at the bottom of the dialog box to get information about the entries
in the dialog boxes. Click Help in a warning dialog box to get information
about the specific error.
Set Up Your Computer to
Connect to a ControlNet
Network You connect your personal computer to a ControlNet network via an RSLinx
ControlNet software communication driver. You use the ControlNet
communication driver to:
• upload and download controller projects using RSLogix™ 5000
programming software.
• schedule a ControlNet network via RSNetWorx for ControlNet
software.
For more information on how to connect a computer to a ControlNet
network, refer to the ControlNet Modules in Logix5000™ Systems User
Manual, publication
CNET-UM001 .
Topic Page
Use the Help Button 21
Set Up Your Computer to Connect to a ControlNet Network 21
Add Modules to the I/O Configuration 22
Download the Program to the Controller 32
Schedule the I/O Module Connections 33
Access Module Data using the ACNR 39