Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 37)

Publication ICM-UM001C-EN-E - March 2013 37
Configure the Adapter Chapter 3
17. Notice the I/O OK in your RSLogix 5000 project is solid green.
18. Notice that the warning triangle next to the XM module is gone in the
I/O Configuration and the module is Running with no faults.
Reschedule a ControlNet Network That Has Previously Been
Scheduled
If you change a network that has already been scheduled, you must reschedule
the network for the changes to take effect. For example, if you add I/O to an
existing ControlNet network, you must reschedule the network for the I/O to
become active.
1. In RSNetWorx for ControlNet software, choose Open from the File
menu.