Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 23)

Publication ICM-UM001C-EN-E - March 2013 23
Configure the Adapter Chapter 3
4. Complete the following entries.
5. Verify that the revision of the controller is compatible with the XM
products.
The controller’s revision should be 16 or later.
6. Click OK to create the project. The following screen appears.
Select a ControlNet Bridge
You need a ControlNet bridge to access the 1440-ACNR adapter from the
ControlLogix network. In our example, we will configure a 1756-CNB (Series
D) bridge to communicate with 1440-ACNR adapter.
1. In the Controller Organizer, right-click the I/O Configuration folder
and select New Module.
In this field Enter
Type Choose the controller type.
Revision Choose the major revision of the firmware for which the project is
configured.
Name Enter a unique name for the controller.
Chassis Type Choose the appropriate chassis type.
Slot Enter the slot of the controller in the chassis.
Create In Enter the directory in which you want to store the project file.