Rockwell Automation 1440-ACNR XM ControlNet Adapter - Manual (Page 27)

Publication ICM-UM001C-EN-E - March 2013 27
Configure the Adapter Chapter 3
2. Click the plus sign next to the Communications folder to display a list of
available communication modules.
3. Select the 1440-ACNR/A ControlNet adapter and click OK.
The New Module dialog box opens.
4. Enter the following information.
5. Click OK to accept the configuration.
On this tab In this field Enter
General Name Enter a unique name for the adapter.
Controller Node Enter the node address of the adapter.
Comm Format The Comm Format for the 1440-ACNR is None. The adapter
makes a direct connection to the XM module referenced by the
data.
Revision Select the major and minor revision level.
Electronic Keying Choose the appropriate electronic keying method.