Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 59)

A–28

RSView32 Runtime User’s Guide
FTDataServerOff FTDataServerOff
Stops running the FactoryTalk live data server. This command has
no parameters.
FTDataServerOn
FTDataServerOn
Runs the FactoryTalk live data server, allowing FactoryTalk clients to
read RSView32 tags and other live data. This command has no
parameters.
FTDataWrite
Disable
FTDataWriteDisable
Stops FactoryTalk Clients from writing values to RSView32 tags.
This command has no parameters.
FTDataWrite
Enable
FTDataWriteEnable
Allows FactoryTalk clients to write values to RSView32 tags. This
command has no parameters.
HandshakeOff HandshakeOff
Disables alarm handshaking, regardless of whether the individual
handshake bits are configured. This command gives no indication
that it has run but will display an error message if not executed
properly.
HandshakeOn HandshakeOn
Enables alarm handshaking. By default this setting is off.
Handshaking can be disabled with the HandshakeOff command.
This command gives no indication that it has run but will display a
message if not executed properly.
This command will not set the handshake bit for any tag already in
alarm when the command is executed.
IMPORTANT