Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 54)

RSView32 commands

A–23
controller or server, unless the Display On-Screen
Keyboard option is selected (in the Behavior tab of
the Display Settings dialog box).
[/U] Updates tag values in all input fields when the display
first opens.
[/O] Suppresses the display of the key list.
[cache] Specifies how to load the specified graphic display
into the display cache, as follows:
/Z Loads the specified graphic display
into the cache (but does not make it
visible), so the display appears
quickly when it is first used.
/ZA Loads the specified graphic display
into the cache (but does not make it
visible) and continually updates the
graphic display, even when it is not
visible. For example, use /ZA for a
display that contains a real-time trend,
so that the trend displays data for its
entire time range when you view it.
To remove all displays from the cache, use the
FlushCache command. To remove a particular
display from the cache, use the FlushCache [file]
command.
[/Pfile] The name of the parameter file that contains the tag
names to be substituted for placeholders in the
display. If the display does not contain placeholders,
do not use this parameter.
If the parameter file has a long file name, enclose the
file name in quotes, for example /P“Long file name”.