Rockwell Automation LDL Ironless Linear Servo Motors - Manual (Page 62)

62 Publication LDL-UM001A-EN-P- March 2009
Appendix A Specifications and Dimensions
Carriage Weight and Heat Sink Area Requirements
Environmental Specifications
Certifications
Cat. No.
Required
Heat Sink Area
cm
2 (in. 2 )
Required
Carriage Plate Weight
kg (lb)
LDL-x030120-DHTxx 774 (120) 1.4 (3)
LDL-x030240-xHTxx 1160 (180) 2.0 (4.5)
LDL-x050120-DHTxx 774 (120) 2.7 (6)
LDL-x050240-DHTxx 1160 (180) 4.0 (9)
LDL-x050360-DHTxx 1680 (260) 5.9 (13)
LDL-x050480-DHTxx 2060 (320) 7.3 (16)
LDL-x075480-xHTxx 2060 (320) 7.3 (16)
Attribute Value
Temperature, operating ambient 0…40 °C (32…104 °F)
Temperature, storage ambient -30…70 °C (-22…158 °F)
Humidity, relative non-condensing 5…95%
Liquid/dust protection IP 65
Shock, max. 20 g peak, 6 ms duration
Vibration, max 30…2000 Hz, 2.5 g peak
Certification
(1)
(when product is marked)
Standards
c-UL-us UL recognized to U.S. and Canadian safety standards (UL 1004-1 and 840 File E230241).
CE
European Union 2004/108/EC EMC Directive compliant with EN 61800-3:2004: Adjustable Speed
Electrical Power Drive Systems - Part 3; EMC Product Standard including specific test methods.
European Union 2006/95/EC Low Voltage Directive compliant with:
• EN 60034-1:2004 Rotating Electrical Machines, Part I: Rating and Performance.
• EN 60204-1:2006 Safety of Machinery – Electrical Equipment of Machines, Part 1: General
Requirements.
(1) Refer to http://www.ab.com for Declarations of Conformity Certificates.