Test the powerflex 70 tags, Test the powerflex, 70 tags – Rockwell Automation 1769-L3xx CompactLogix System Quick Start User Manual

Page 161: O to

Publication IASIMP-QS001C-EN-P - October 2009

161

Create a PowerFlex 70 Application Chapter 12

Test the PowerFlex 70 Tags

Ethernet/IP and ControlNet only (for DeviceNet, skip to

)

2. Double-click Controller Tags.

3. Locate and

expand the
PowerFlex 70
output tag.

4. Change the ClearFault tag to 1 to

clear any initial faults.

5. Change the ClearFault tag back to

1. Move the controller keyswitch to RUN.

TIP

To change a tag in RSLogix:

1. Select the tag value.
2. Enter or select the desired value.
3. Press Enter.