Rockwell Automation TL-Series Servo Motor - Manual (Page 22)

22 TL-Series Servo Motor Installation Instructions
Publication TL-IN001C-EN-P — March 2005
Transition Plates
Transition plates allow a TL-Series NEMA motor to physically replace N-Series
motors.
Transition Cables
Transition cables interface between existing N-Series and Y-Series motor cables
and the flying lead cables on TL-Series motors with incremental encoders.
Catalog Number Description
Compatible Motors
N-Series TL-Series
NEMA
TL-TRPLAT-17-23 TL-Series Transition Plate, NEMA 17 to 23 N-23xx TL-A1xxP-xxxxN
TL-TRPLAT-23-34 TL-Series Transition Plate, NEMA 23 to 34 N-34xx TL-A2xxP-xxxxN
TL-TRPLAT-34-42 TL-Series Transition Plate, NEMA 34 to 42 N-42xx TL-A25xxP-xxxxN
Transition plates are not available for the N-56xx motors.
Motor Type Cable Length Feedback Cable Power Cable Brake Cable
N-Series 305 mm (12.0 in.) 2090-XXNFTN-S
1
2090-XXNPTN-16S
1
2090-XXNBTN-S
1
Y-Series 610 mm (24.0 in.) 2090-XXNFTY-S
1
2090-XXNPTY-16S
1, 2
1. Transition cables are only for use on TL-Series motors with incremental encoders.
2. Y-Series transition cables have Power and Brake connections combined in one cable.