Rockwell Automation TL-Series Servo Motor User Manual
Page 19
TL-Series Servo Motor Installation Instructions 19
Publication TL-IN001C-EN-P — March 2005
4 Tolerance for this dimension is: TL
-
A1xx -0.021 mm (-0.0008 in.); TL-A2xx -0.025 mm (-0.001 in.); -A25xx -0.03 mm (-0.0012 in.);.
5 TL
-
A1xx has 2 threaded holes, TL-A2xx and TL-A25xx have 4 mounting holes.
Mounting holes are S diameter on M diameter bolt circle.
6 Tolerance for cable length is ±50.0 mm (±1.97 in.). Minimum bend radius is 15.00 mm (0.59 in.).
7 Tolerance for this dimension is: -0.38 mm (-0.015 in.).
8 Tolerance for this dimension is: +0.051 mm (+0.002 in.)
9 Tolerance for x and y dimensions is: (-0.002 in.), length is untoleranced.
Motor
Series
TL-A
N
4
mm
(in.)
NB
mm
(in.)
P
mm
(in.)
S
5
mm
(in.)
T
mm
(in.)
TB
mm
(in.)
CAB
6
mm
(in.)
G
7
mm
(in.)
F
8
mm
(in.)
Key
9
mm
(in.)
120
22.0
(0.8661)
—
42.0
(1.65)
8-32
Thread
2.0
(0.08)
—
300
(11.8)
— —
—
130
220
38.1
(1.50)
—
56.4
(2.22)
5.5
(0.217)
1.5
(0.06)
—
300
(11.8)
10.92
(0.43)
3.175
(0.125)
(0.125 x 0.125
x 0.9375)
230
2530
73.02
(2.875)
—
86.0
(3.39)
5.5
(0.217)
1.6
(0.06)
—
300
(11.8)
13.13
(0.517)
4.763
(0.1875)
(0.187 x 0.187
x 1.156)
2540
NOTE: NEMA motor flanges and shafts are designed to inch dimensions. Other frame areas are designed to metric dimensions.
Conversions are mathematically calculated.