Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 134)

Publication LOGIX-UM004A-EN-P - March 2007
134 RSLogix 5000 Add-On Instruction
Generating a Fuzzy Add-On
Instruction You can export a fuzzy system to an Add-On Instruction XML import
file (.L5X).
To generate the Add-On Instruction (AOI) for the active fuzzy project,
click Tools>Add-On Instruction > Instruction Generator.
The following dialog appears.
The following conditions must be met to generate a fuzzy AOI:
• All blocks of the fuzzy system must be connected
• The fuzzy system must include at least one input port and one
output port
• All rules must be complete (there is no rule with empty
conditions or consequents)
• Each rule block must include at least one rule
• Each linguistic variable must include at least one term
The default file name of the Add-On Instruction is taken from the
name of the fuzzy system in FuzzyDesigner, but you can change the
name. The instruction name must follow to the Add-On Instruction
naming rules. It must:
• Be no more than 40 characters long.
• Start with a letter or underscore (_). All other characters can be
letters, numbers, or underscores.