Rockwell Automation MPS-xxxx Stainless Steel Servo Motor - Manual (Page 24)

24 MP-Series Stainless Steel Servo Motor with 100 mm to 165 mm Frame Size
Publication MP-IN005F-EN-P - January 2014
Specifications
The exterior surfaces of the MP-Series stainless steel servo motors are made from the materials in
the table. Store the motor in a clean and dry location within the environmental conditions.
Exterior Surface Materials
Surface Material
Shaft Stainless steel - grade 303
Shaft key Stainless steel - 300 series
Housing Stainless steel - grade 304
Connector Nickel-plated zinc casting
Environmental Specifications
Attribute Value
Temperature, operating 0…40 °C (32…104 °F)
(1)
(1) To obtain this thermal rating, mount the motor on a surface with heat dissipation equivalent to a 304.8 x 304.8 x 12.7 mm (12 x 12 x 0.5 in.)
aluminum heatsink.
Temperature, storage -30…70 °C (-2 …158 °F)
Relative humidity, storage 5…95% noncondensing
Atmosphere, storage Noncorrosive
Motor housings are rated with multiple International Protection Codes (IP ratings) for environmental protection
IP66 Dust tight, powerful water jets, room temperature water
(2)
(2) IP rating descriptions are only for reference. Refer to the international standards for more complete rating descriptions.
IP67 Dust tight, temporary immersion, room temperature water (2)
IP69K
Dust tight, water/steam jets up to 100 bar (1200 psi) with nozzle pressure at
approximately 80 °C (176 °F)
(2)
Connectors are IP66 and IP67 rated (2)