Rockwell Automation SA3100 AutoMax Distributed Power System - Manual (Page 14)

1-6 AutoMax Distributed Power System Overview
• Interconnection Diagram (W/I) - Diagram showing all interconnecting field wiring
between individual assemblies or components provided by Rockwell or others.
These diagrams are provided optionally in place of the special cabling instructions
in the elementary diagrams (W/E).
• Panel Layout Diagram (W/L) - Diagram showing the physical arrangement of the
electrical devices on each control panel, including customer connection terminals
with wire numbers.
• Motor Control Center Diagram (W/M) - Diagram showing the physical location of the
units or compartments within each Motor Control Center and the elementary
diagram (W/E) for each unit.
• Note Sheet (W/N) - Wiring instructions and definitions of the standard notes and
nomenclature used in the drawings. The notes also indicate the location of the
components or subassemblies that may be separately mounted.
• Operator’s Station Diagram (W/O) - Diagram showing the arrangement of the
devices on an operator’s station and the location of field terminals with wire
numbers.
• Program Documentation (W/P) - Graphic diagrams of Control Block application
tasks.
• Construction Drawing (W/S) - Drawing that provides the information required for the
installation of Class A or Class B open Mill Control or for Mill Control Houses. These
drawings show the overall dimensions of each assembly, the mounting details, and
conduit entry locations.
• Index Sheet (W/X) - Sheet listing the description, last revision date, drawing
number, sheet number, and sub order for all drawings in the sales order. This sheet
provides a means of identifying which drawings comprise a complete and
up-to-date set of prints.
• Printouts of BASIC and PC (Ladder) language application tasks.
• Instruction manuals, performance data, and a list of replacement parts.