3 automax programming executive software manuals – Rockwell Automation SA3100 AutoMax Distributed Power System User Manual
Page 12
1-4
AutoMax Distributed Power System Overview
The 1567 Power Max documentation is listed in table 1.2.
1.3
AutoMax Programming Executive Software Manuals
The documentation that describes the AutoMax Programming Executive and AutoMax
programming is contained in two binders, J2-3104 and J2-3092.
Binder J2-3104 (AutoMax System Operation) contains the following instruction
manuals:
•
J-3650
AutoMax Processor Module
•
J-3669
AutoMax Pocket Reference
•
J2-3102 AutoMax Programming Executive
•
J2-3103 AutoMax Executive Software Loading Instructions
The AutoMax Programming Executive manual describes the software used to
configure an AutoMax system (including DPS drive systems) and to create the
application tasks that will run on AutoMax Processors. This manual also describes
how to load the operating systems to the AutoMax Processors and UDC modules in
the AutoMax rack(s), how to load AutoMax and UDC tasks to the rack(s), and how to
communicate with an AutoMax rack on-line to monitor or modify variable values and
start or stop AutoMax and UDC tasks.
Table 1.2 – 1567 Power Max Documentation (Binder S-3040)
Document
Document Part Number
DPS Overview
S-3005
UDC Module
S-3007
Fiber-Optic Cabling
S-3009
Medium Voltage Inverter
S-3041
12-Pulse Diode Rectifier
S-3048
PMI Subsystem
S-3049
Drive Configuration & Programming
S-3050
Liquid Cooling System
S-3051
Installation Guidelines
S-3052
Drive Information Guidelines
S-3046