Rockwell Automation 1794-IP4 Series B FLEX I/O PULSE COUNTER User Manual - Manual (Page 8)

Table of Contents ii
Publication 1794ĆUM016B-EN-P - August 2002
Chapter 4
What This Chapter Contains 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring Your Pulse Counter Module 4-1 . . . . . . . . . . . . . . . . . . . . .
Reading Data From Your Module 4-2 . . . . . . . . . . . . . . . . . . . . . . . . .
Mapping Data for the Module 4-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pulse Counter Module (1794ĆIP4) Image Table Mapping 4-2 . . . . . . .
Block Transfer Read Word Assignments for the Pulse Counter Module
(1794ĆIP4) 4-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bit/Word Definitions for Block Transfer Read Words for the
Pulse Counter Module 4-3 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Transfer Write Word Assignments for the Pulse
Counter Module 4-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bit/Word Definitions for the Block Transfer Write Words for the Pulse
Counter Module 4-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter Summary 4-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5
What This Chapter Contains 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About DeviceNetManager Software 5-1 . . . . . . . . . . . . . . . . . . . . . . . .
Polled I/O Structure 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapter Input Status Word 5-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Throughput 5-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mapping Data into the Image Table 5-3 . . . . . . . . . . . . . . . . . . . . . . . .
Pulse Counter Module (1794ĆIP4) Image Table Mapping 5-3 . . . . . . .
Block Transfer Read Word Assignments for the Pulse Counter
Module (1794ĆIP4) 5-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Block Transfer Write Word Assignments for the Pulse
Counter Module 5-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bit/Word Definitions for the Pulse Counter Module 5-4 . . . . . . . . .
Defaults 5-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6
Chapter Objectives 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the ControlNet Adapter 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communication Over the FLEX I/O Backplane 6-1 . . . . . . . . . . . . . . . .
Scheduled DataĆTransfer 6-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unscheduled DataĆTransfer 6-2 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Module I/O Mapping 6-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I/O Structure 6-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapter Input Status Word 6-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safe State Data 6-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Actions 6-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communication Fault Behavior 6-5 . . . . . . . . . . . . . . . . . . . . . . . . .
Idle State Behavior 6-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Data Behavior upon Module Removal 6-5 . . . . . . . . . . . . . . . .
Writing Configuration to and
Reading Status from Your
Module with a Remote I/O
Adapter
How Communication Takes
Place and I/O Image Table
Mapping with the DeviceNet
Adapter
Input, Output and
Configuration Files for
Analog Modules when used
with ControlNet