Rockwell Automation 2300 Family of Drive Systems Hardware - Manual (Page 7)

Preface
Overview
Please read this preface to familiarize yourself with this manual. This
preface covers the following topics:
• who should use this manual
• the purpose of this manual safety precautions
• contents of this manual
• related documentation conventions used in this manual
• drive system receiving
• Rockwell Automation support
Who Should Use This
Manual This manual is intended for those who are responsible for installing
Rockwell Automation drive systems.
Purpose of This Manual This manual provides installation instructions for Rockwell Automation’s
Bulletin 2300 family of drive systems. The provided procedures are for
those tasks that need to be done at the customer site before system startup.
How To Use This Manual When using this manual to install your drive system, you will begin and
complete the installation in Chapter 1 of this manual. Chapter 1 will refer
you to other chapters that address specific unit configuration instructions
and busbar splice installation instructions. When you are referred to another
chapter–go to that chapter, perform the required procedure(s), and then
return to Chapter 1.
Note: You can also refer to the appropriate chapter of this manual
whenever you need to:
• remove/install bucket units
• remove/install roll-out chassis units
• remove/install an MCC door
!
ATTENTION:
If you do not have a basic understanding of the
drive system, as designed, or of any product(s) used in the
system, contact your local Rockwell Automation representative
for information on available training courses before starting the
system.