Connect to the network, Battery information, Backlight assembly disposal – Rockwell Automation VersaView 1200P Integrated Display Computers for Hazardous Locations User Manual
Page 19
VersaView 1200P Integrated Display Computers for Hazardous Locations 19
Publication 6183H-IN001E-EN-P - July 2007
Connect to the Network
The computers connect to an Ethernet network using CAT5 twisted pair Ethernet
cabling with RJ45 connectors.
Battery Information
The computer contains a battery to maintain CMOS settings and the real-time clock.
The battery is located in a battery holder on the computer’s motherboard. The
battery is not user serviceable.
Backlight Assembly Disposal
IMPORTANT
To prevent performance degradation of Ethernet communication, do not subject
the computer or cables to extreme radiation or conducted high-frequency noise.
Proper cable routing and power conditioning is required to ensure reliable
Ethernet communication in an industrial environment. Rockwell Automation
recommends that you route all Ethernet cabling through dedicated metal
conduits. Installing ferrite bead filters at the cable ends may also improve
reliability.
WARNING
Do not dispose of battery in a fire or incinerator. Dispose of used batteries in
accordance with local regulations or manufacturer’s instructions.
-5.13.
ATTENTION
The backlight assembly in this unit contains mercury. At the end of its life, this
equipment should be collected separately from any unsorted municipal waste.