Rockwell Automation VersaView 1200P Integrated Display Computers for Hazardous Locations - Manual (Page 13)

VersaView 1200P Integrated Display Computers for Hazardous Locations 13
Publication 6183H-IN001E-EN-P - July 2007
Connect a Keyboard and Pointing Device
A keyboard and/or mouse can be connected to the computer using either the USB
or PS/2 connectors. The USB and PS/2 ports should not be used unless the area is
known to be non-hazardous. Access to the ports is restricted by a cover that should
be kept closed when the area could be hazardous.
Keyboard and Pointing Device
Connect Peripheral Devices
• When connecting peripheral devices to the COM, Printer, or VGA ports on
the unit, secure the connected devices with screws.
• When connecting a LAN cable, make sure the cable is fully inserted and the
latch engaged.
• Access to the USB and PS/2 ports is restricted by a cover for hazardous
location security.
In addition, nonincendive field wiring circuit parameters are provided with
the control drawing on page 14.
WARNING
When connecting a LAN cable, make sure the cable is fully inserted and
the latch engaged. Failure to do so, could result in an electrical arc. This
could cause an explosion in a hazardous location.
1200P Series B shown
with USB and PS/2
access covers opened.