Voltage sensing board dimensions, Mounting and connecting the voltage sensing board – Rockwell Automation 7703E Medium Voltage SMC OEM Components - 10-15 kV User Manual
Page 21
Rockwell Automation Publication 7703E-IN001E-EN-P - July 2014
21
PowerBrick™ Installation
Chapter 3
Voltage Sensing Board
Dimensions
Figure 7 - Voltage Sensing Board Dimension Diagram
Mounting and Connecting
the Voltage Sensing Board
The voltage sensing board (VSB) for the relevant voltage range (see table below)
should be mounted adjacent to the PowerBrick (refer to
for
dimensions). All connection points are to be made accessible.
Connect the voltage sensing board to the L1 to L3 (Line) and T1 to T3 (Load)
terminals of the power stack (refer to
and
Recommended specifications for wire used on medium voltage connections: UL
style 3239, #18 AWG, 40 KVDC silicone rubber insulated wire, covered with
PCV tubing or other suitable material.
8.9 [0.35]
4 holes
Includes features to secure
HV wire for maintained spacings.
Approximate dimensions in mm [inches]
Description
Line Voltage
(3 phase, 50/60 Hz)
MV Ratio
Catalog Number
Voltage Sensing Board
10,000…12,000V
126
7703E-VSM
12,001…14,400V
97
7703E-VSN
IMPORTANT
The wires must be prevented from touching live or grounded metals, and low
voltage wiring, or have supplemental insulation suitable for the application.
Use the tapered features below the Lx and Tx terminals to maintain wire
spacings in this area.