Rockwell Automation 2711-K9A10_K9C10_T9A10_T9C10 DeviceNet Communications User Guide - Manual (Page 27)

27
Publication 2711-6.0.4
These messages indicate critical fault conditions. They appear as a
full screen box with an Error #635 in the upper left corner. Reset the
terminal to clear the condition. If the problem persists, note the 2-
digit code and contact Allen-Bradley.
Code Indicates: Recommended Action
5 PCCC Message Transaction error during file transfer. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
6 Stack overflow fault. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
17 Client Object Failed. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
18 CAN Chip Failed to initialize. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
37 The size of a particular channel exceeds the size limita-
tions set by the daughtercard. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
20xx Critical Internal DeviceNet Firmware fault. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
9-11
21,22
24-36
Internal faults associated with motherboard/daughter-
card communications. Should not occur in normal operation. Reset the terminal.
If problem re-occurs, contact Allen-Bradley.
Fault Messages