Rockwell Automation 2711-K9A10_K9C10_T9A10_T9C10 DeviceNet Communications User Guide - Manual

Publication 2711-6.0.4
User Guide
DeviceNet Communications
for PanelView Terminals
Introduction This document describes how to connect and configure communications for the
DeviceNet versions of the PanelView terminals. This information is a supplement to
the PanelView Terminal user manual and the PanelBuilder software documentation.
For information about: See page:
Related Publications 2
Before You use this Guide 2
DeviceNet PanelView Terminals 3
Making DeviceNet Connections 3
Typical DeviceNet Network 4
Modifying DeviceNet Settings from the Terminal 5
Setting Up Communications using PanelBuilder 7
PanelView Message Types 10
I/O Slave Messaging 11
Explicit Messaging 13
PanelView Tag Form 17
Using the Electronic Data Sheet 20
Downloading Applications Over a Serial Link 21
DeviceNet Application Report 21
DeviceNet Error Messages and Codes‘ 22
Electronic Data Sheet (EDS) File Error Messages 24
PanelBuilder Device Error Messages 24
PanelBuilder Translation Error Messages 25
Communication Status/Error Messages 25
Alert Messages 26
Fault Messages 27
Appendix A - Read/Write Tag Conversion Table (Explicit Client)
Appendix B - Electronic Data Sheet
Appendix C - 1305 Drive Application