Accessories, Storage, Accessories storage – Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Trans.& Handling - ForGe User Manual
Page 16

16
Rockwell Automation Publication 7000-IN008C-EN-P - April 2013
Chapter 2 Transportation and Handling Procedures
The lifting angles hold the cabinets together to prevent separation and damage
while riggers move the drive to the final installation area. Remove the lifting
angles before attaching cooling fans and fan enclosures.
Figure 10 - Shackle attachment, bottom lifting bar (drives with bottom-lift provision)
For drives with bottom lifting provision, attach the locking collars and shackles
(included) to the bottom lifting bar. Rotate the bar if necessary to suit the
available rigging. See
Accessories
Accessory items may ship with the drive. During the post-delivery inspection,
locate all accessories or loose items listed on the shipping documentation before
moving the drive to an installation or storage area.
Magnetic devices such as DC link, common mode choke, or line reactors may
ship separately from the drive because of weight. Install these items once you
install the drive in its permanent location.
Storage
Store the drive according to the following conditions if not immediately
installing the equipment.
• Store the drive in a clean, dry, dust-free environment.
ATTENTION: Failure to install the pair of lifting angles prior to moving the Drive
may result in personal injury and/or equipment damage.
M12 washer, nut
M12 bolt, washer
Shackle