Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Trans.& Handling - ForGe - Manual (Page 10)

10 Rockwell Automation Publication 7000-IN008C-EN-P - April 2013
Chapter 2 Transportation and Handling Procedures
• Keep the drive bolted to the wooden shipping skid to minimize the
possibility of it tipping. Do not remove the wood skid and top lifting angle
until the drive is at the installation area. If the drive is crated, the crate
includes a pair of lifting angles. Re-install both lifting angles on top of
drive. High-power air-cooled drives and converter sections do not have
wood skids or top lifting angles but have permanently-attached steel frame
bases.
Shipping Details
Product
Type VFD Frame
Type System Voltage (VFD Shipping Pieces) Packaging Type Truck Type Off-loading Options
Forklift Overhead Lifting
2300V 3300V 4160V 6600V Domestic Export Enclosed
Trailer Flatbed Single Tandem Top
Provisions
Bottom
Provisions
Air-cooled
VFD “A” Frame One One One One Yes Yes Yes Yes Yes n/a Yes n/a
“B” Frame with
heat sink One One One One Yes Yes Yes Yes Yes n/a Yes n/a
“B” Frame with
heat pipe n/a Two Two Two or
Three
(1)
Yes Yes n/a Yes One for CMC
cabinet and
Line
Reactor
(3)
Yes One for CMC
cabinet and
Line
Reactor
(3)
Yes
Liquid-
cooled VFD “C” Frame n/a n/a One One or
Two
(2)
Yes Yes n/a Yes One for CMC
cabinet and
Line
Reactor
(4)
Yes Yes n/a
(1) 4160V RPTX and 4160V RPDTD have two shipping pieces; 6600V RPTX has two shipping pieces; 6600V RPDTD has three shipping pieces.
(2) 6600V RPDTD (430A and higher) has two shipping pieces; balance of liquid-cooled offering ships as single piece.
(3) CMC cabinet and Line Reactor only have provisions for overhead lifting and/or forklift.
(4) Can use single forklift for CMC cabinet or Line Reactor (for configurations where it ships separately)