Rockwell Automation 1902 Syncpro II - Manual (Page 7)

Rockwell Automation Publication 1902-IN001B-EN-E - April 2013 7
Chapter
1
Product Description
Introduction The SyncPro II consists of a programmable small logic controller
(MicroLogix™ 1500) with the following additional peripheral items:
• PanelView™
Component Terminal C400
• Power Factor Transducer
• Analog/Digital Pulse Board
• Conditioning Resistors
• Interposing Relays FSR and ESR
The SyncPro II system is designed to provide supervisory protection and field
control to a brush-type synchronous motor controller, proper field application
timing, squirrel-cage protection against long acceleration and stall conditions as
well as running pullout protection by monitoring motor power factor. When
combined with a suitable induction motor protection relay, the SyncPro II
provides the necessary overload protection to the brush-type synchronous
motor.
Related Documentation The following publications contain information for components associated with
the SyncPro II.
IMPORTANT Although the SyncPro II makes use of some standard MicroLogix 1500
programmable controller components, it is imperative that the controller is a
dedicated unit expressly for the control and protection of the field of a single
synchronous motor. The firmware and hardware configuration must only be
used for its designed purpose. Do not attempt to modify the controller in any
way for another use. No additional PLC control cards can be added nor should
the firmware/program be modified.
Publication 2711C-IN001_-EN-P PanelView Component Terminal - Installation Instructions
Publication 1900-2.10 Measuring for Synchronous Motor Data
Publication 900-1.0 Synchronous Motor Control
Publication SGI-1.1 Safety Guidelines for Application, Installation and Maintenance
Publication 1764-UM001_-EN-P MicroLogix 1500 Programmable Controller