Rockwell Automation 1792D-16BVT0CD ArmorBlock MaXum 16 Input Module with Complete Diagnostics User Manual
Installation instructions
Publication 1792D-IN053A-EN-P - August 2002
Installation Instructions
ArmorBlock MaXum 16 Input Module with
Complete Diagnostics
(Cat. No. 1792D-16BVT0CD)
This ArmorBlock MaXum
I/O module (Cat. No. 1792D-16BVT0CD)
is a stand-alone 24V dc I/O product which communicates via a
DeviceNet
network. The sealed housing of this module requires no
enclosure.
This model has 16 inputs accessed through Y splitter cables. Inputs
are 24V dc and are software selectable for PNP (sourcing) or NPN
(sinking) devices. The default is sinking. Diagnostic features included
are short circuit and open wire detection reported to the point level.
This product also supports DeviceLogix.
30723-M
Table of contents
Document Outline
- ArmorBlock MaXum 16 Input Module with Complete Diagnostics Installation Instructions
- Important User Information
- Package Contents
- Install Your ArmorBlock MaXum I/O Module
- Set the Node Address
- Mount the Module to the Cable Base
- Connect the Input Cord Sets to the MaXum Module
- Communicate With Your ArmorBlock MaXum Module
- Troubleshoot with the Indicators
- Specifications
- Hazardous Location Approval
- Back Cover