Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module - Manual (Page 116)

116 Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
Chapter 10 Using the Studio 5000 Environment in Remote I /O and Block Transfer Applications
Naming Screen (first
screen): Parameter: Definition:
Name Module name. This field is required.
Description Optional description of the module.
Slot Location of module in the chassis.
Type Application for each module channel. This field must be changed to RIO.
Baud Rate Rate of communication at which the 1756-DHRIO module scans the remote
I/O. Available options are:
• 57.6K bps
• 115.2K bps
• 230.4K bps
Revision Minor revision of the 1756-DHRIO or 1756-DHRIOXT module.
Electronic Keying Parameter that determines if the controller that owns the 1756-DHRIO or
1756-DHRIOXT module establishes a connection with the module. The
options are:
• Compatible Module - Controller attempts to establish a connection with
any module in this slot that can emulate the configuration being sent
from the controller.
• Disable Keying - Controller attempts to establish a connection to the
module regardless of its type. This option is not recommended.
• Exact Match - Controller only attempts to establish a connection with the
module if it matches the configuration parameters being sent from the
controller.
Requested Packet
Interval Screen
(second screen): Parameter: Definition:
Requested Packet
Interval User-defined rate (2…750ms) that determines the rate at which the
module scans data from the remote I/O.
Inhibit Module Feature that lets you configure a 1756-DHRIO or 1756-DHRIOXT module but
prevent it from communicating with the controller. In this case, the
controller does not establish a connection until the module is uninhibited.
Major Fault on
Controller if
Connection Fails in Run
Mode Use this feature to choose whether a major fault occurs on the controller if
the connection between the controller and the 1756-DHRIO or
1756-DHRIOXT module fails.