Rockwell Automation 1771-OFE Analog Output Module Installation Instructions - Manual (Page 4)

Analog Output Module 4
Publication 1771-IN044C-EN-P - October 2002
!
ATTENTION Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic
discharge, which can cause internal damage and
affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge potential
static.
• Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component
boards.
•
Do not touch circuit components inside the
equipment.
•
If available, use a static–safe workstation.
•
When not in use, keep modules in appropriate
static–safe packaging.
The 1771-OFE module can be used with any 1771 I/O chassis.
Compatibility and data table use is listed below.
C
Use of Data Table Compatibility
Catalog
Number
Input
Image
Output
Image
Read
Block
Write
Block
Addressing
Chassis
S i
Image
Bits
Image
Bits
Block
Words
Block
Words 1/2ĆSlot 1ĆSlot 2ĆSlot
Series
1771ĆOFE/B 8 8 5 13 Y Y Y A, B
A = Compatible with1771ĆA1, ĆA2, ĆA4
B = Compatible with1771ĆA1B, ĆA2B, ĆA3B, ĆA3B1, ĆA4B
Y = Compatible without restriction.
The analog output module receives its power through the 1771 I/O
chassis backplane from the chassis power supply. It does not require
any other external power supply. When planning your system, you
must consider the power usage of all modules in the I/O chassis to
prevent overloading the I/O chassis backplane and/or power supply.
Add this to the requirements of all other modules in the I/O chassis.
Analog Module Power Requirement
1771ĆOFE1
1 5A @ 5V dc
1771ĆOFE2
1.5A @ 5V dc
1771ĆOFE3 2.5A @ 5V dc
Understand Product
Compatibility
Calculate Power
Requirements