Rockwell Automation 1756-ENBT ControlLogix EtherNet/IP Bridge Module Installation Instructions - Manual (Page 18)

18 ControlLogix EtherNet/IP Bridge Module
Publication 1756-IN019C-EN-P - November 2004
Specifications
Module Location Any slot in the ControlLogix chassis
Backplane Current (mA)
at 5V.1V dc 700mA
Backplane Current (mA)
at 24V 3mA
Isolation Voltage,
Continuous 30V
Tested to 707V dc for 60 seconds
Power Dissipation, Max. 3.65W
Conductors
Wire Size
Category 802.3 compliant - shielded or unshielded twisted pair
2
1
Ethernet Connector RJ45 Cat. 5
User Manual ENET-UM001
Environmental Conditions
Operating
Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0 to 60°C (32 to 140°F)
Storage
Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal
Shock):
–40 to 85°C (–40 to 185°F)
Relative
Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp
Heat):
5 to 95% non-condensing
Vibration IEC60068-2-6 (Test Fc, Operating):
2g @ 10-500Hz
Shock,
Operating IEC60068-2-27 (Test Ea, Unpackaged shock):
30g