Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switches Installation Instructions - Manual (Page 19)

Stratix 6000 Ethernet Managed Switches 19
Rockwell Automation Publication 1783-IN004B-EN-P - June 2014
Wire size Ethernet connections:
RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e min cable
according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702
DC Power connections:
0.33... 3.3 mm
2
(22...12 AWG) solid or stranded copper wire rated at 75 °C
(167 °F) or greater, 1.2 mm (3/64 in.) insulation max
Functional ground connection:
3.3 mm
2
(12 AWG) solid or stranded copper wire rated at 75 °C (167 °F) or greater
Torque DC power and functional ground: 1.36 Nm (12 pound-inches)
Fiber optic Ethernet
data rate
(1)
1000 Mbps
(1)
—
Fiber optic connecting
mode
(1)
Full duplex
(1)
—
Fiber optic connector
type
(1)
LC
(1)
—
Wiring category
(2) (3)
2 - on DC power ports
2 - on Ethernet ports
North American temp
code T4
IEC temp code T4
(1) Available when you purchase an optional SFP module.
(2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
(3) Use this Conductor Category information for planning conductor routing as described in the appropriate system-level
installation manual.
Stratix 6000 Ethernet Managed Switches (continued)
Attribute 1783-EMS08T 1783-EMS04T