Rockwell Automation 1783-EMS08T Stratix 6000 Ethernet Managed Switches Installation Instructions - Manual (Page 13)

Stratix 6000 Ethernet Managed Switches 13
Rockwell Automation Publication 1783-IN004B-EN-P - June 2014
Install an Optional SFP Module
To install a 1G fiber small form-factor pluggable (SFP) module into the fiber
optic Ethernet slot on the bottom to the 1783-EMS08T switch, grasp the SFP
module on the sides and insert it into the slot until you feel the connector snap
into place.
Available SFP modules include the following:
• 1783-SFP1GSX - 1000BASE-SX multi-mode fiber transceiver
• 1783-SFP1GLX - 1000BASE-LX single-mode fiber transceiver
TIP For detailed instructions on installing, removing, and connecting to SFP
modules, see the documentation that shipped with the SFP module.
ATTENTION: SFP modules are static sensitive devices. Always use an ESD wrist
strap or similar individual grounding device when handling SFP modules.
IMPORTANT Installing and removing an SFP module can shorten its useful life. Do not
remove and insert SFP modules more often than is absolutely necessary.
31877-M
1 2
3 4
5 6
7 8