Rockwell Automation 1734-IK/C POINT I/O 5V and 24V Encoder/Counter Module Installation Instructions - Manual (Page 6)

6 POINT I/O™ 5V and 24V Encoder/Counter Modules
Publication 1734-IN005G-EN-E - September 2012
Before You Begin
You can use these Series C POINT I/O Encoder/Counter modules with DeviceNet and
PROFIBUS adapters. If you are using RSLogix 5000 software, version 11 or higher, you
can also use the Series C modules with ControlNet and Ethernet adapters.
Use this diagram to identify the external features of the module.
POINT I/O 5V and 24V Encoder/Counter Modules
The wiring base assembly includes a terminal base, 1734-TB or 1734-TBS, which consists
of a mounting base, 1734-MB, and removable terminal block, 1734-RT or 1734-RTS.
Description Description
1 Module locking mechanism 6 Slide-in writable label
2 Module wiring diagram 7 Insertable I/O module
3 DIN rail locking screw (orange) 8 Removable terminal block (RTB) handle
4 Mechanical keying (orange) 9 Removable terminal block
5 Interlocking side pieces 10 Mounting base
0
1
1
2
3
4
5
6
7
8
9
10
41825