Rockwell Automation 1757-FFLD4 Foundation Fieldbus Linking Device Installation Instructions - Manual (Page 18)

18 Foundation Fieldbus Linking Device
Publication 1757-IN021E-EN-P - August 2009
4. Click the Port Configuration tab to view or change parameters.
5. When you finish making changes, click Apply and then OK.
Troubleshoot the Linking Device
The following instructions describe how to maintain your linking device.
Reset the Linking Device
You can reset the linking device with the:
• reset jumper (locally).
• reset button (locally).
• web page (remotely).
To use the reset jumper or reset button, follow the procedures below. To use
the web page, refer to the FOUNDATION Fieldbus Linking Device User
Manual, publication
1757-UM010 .
You can reset the linking device to the following defaults:
• Reset Configuration
• Factory