Rockwell Automation 1757-FFLD4 Foundation Fieldbus Linking Device Installation Instructions User Manual
Foundation fieldbus linking device, Installation instructions, About the fieldbus linking device
Installation Instructions
Foundation Fieldbus Linking Device
Catalog Numbers 1757-FFLD2, 1757-FFLD4
About the Fieldbus Linking Device
The F
OUNDATION
Fieldbus Linking Device bridges from the Ethernet
network to H1 networks. It accepts either High-speed Ethernet (HSE) or
EtherNet/IP messages and converts them to the H1 protocol. By supporting
H1, HSE, and EtherNet/IP protocols, the linking device is capable of
providing bridging capability of Rockwell Automation products and
F
OUNDATION
Fieldbus products on the Ethernet network to products on H1
links.
Topic
Page
North American Hazardous Location Approval
European Hazardous Location Approval
Parts Illustration of the Fieldbus Linking Device
This manual is related to the following products:
Table of contents
Document Outline
- 1757-IN021E-EN-P, Foundation Fieldbus Linking Device Installation Instructions
- About the Fieldbus Linking Device
- Important User Information
- Environment and Enclosure
- North American Hazardous Location Approval
- European Hazardous Location Approval
- Parts Illustration of the Fieldbus Linking Device
- Install the Linking Device
- Wire the Linking Device
- Configure the Linking Device
- Troubleshoot the Linking Device
- Specifications
- Additional Resources
- Back Cover