Rockwell Automation 1757-FFLD4 Foundation Fieldbus Linking Device Installation Instructions - Manual (Page 16)

16 Foundation Fieldbus Linking Device
Publication 1757-IN021E-EN-P - August 2009
7. To enable DHCP for the linking device, select the device and click
Enable DHCP.
Save the Relation List
You can save the Relation List for later use. Do these steps to save the
Relation List.
1. From the File menu, choose Save As.
The Save dialog box opens.
2. Choose the location to save in.
3. Type a File name for the Relation List (for example, ‘Control System
Configuration’) and click Save.
Install the EDS File
The EDS file can be uploaded directly from the linking device. This feature
lets you register the EDS file for your device from within RSLinx software by
following the steps listed below.
1. Open RSLinx software, and browse for the linking device.
2. Right-click the linking device and choose Upload EDS file from
the device.
3. Complete the EDS wizard to register the EDS file.
The EDS file can also be downloaded from
http://www.ab.com/networks/eds.html and installed with the RSLinx EDS
Hardware Installation tool.