Rockwell Automation 1747-L55x,D174710.4 SLC 500 Ethernet - Manual (Page 4)

ii
Publication 1747-10.4
Configuration Via BOOTP 3–7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using DOS/Windows BOOTP 3–8 . . . . . . . . . . . . . . . . . . . . . . . .
Install the DOS/Windows BOOTP server 3–9 . . . . . . . . . . . . . .
Edit the DOS/Windows BOOTP Configuration File 3–9 . . . . . . .
Run the Boot Server Utility 3–11 . . . . . . . . . . . . . . . . . . . . . . . . . .
Running the DOS-Based Utility 3–11 . . . . . . . . . . . . . . . . . . . . .
Running the Windows-Based Utility 3–12 . . . . . . . . . . . . . . . . . .
Chapter 4
Ethernet Connections 4–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG Instruction 4–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitation for Manipulating the Control Block Bits 4–2 . . . . . . . . . .
Control Block Layouts 4–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG Instruction Control Block 4–4 . . . . . . . . . . . . . . . . . . . . . . .
Interpreting MSG Error Codes 4–6 . . . . . . . . . . . . . . . . . . . . . . . . . .
Interpreting Ethernet Status Data 4–8 . . . . . . . . . . . . . . . . . . . . . . .
Using Subnet Masks and Gateways 4–10 . . . . . . . . . . . . . . . . . . . . .
Manually Configuring Channel 1 for Processors on Subnets 4–11 . .
Using BOOTP to Configure Channel 1 for Processors on
Subnets 4–12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5
Passthru Feature 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address Routing Table 5–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status File Bits 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG Error Code 5–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Passthru Examples 5–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example 1: DF1-to-Ethernet and Ethernet-to-DF1 5–3 . . . . . . . . .
Example 2: DH485-to-Ethernet and Ethernet-to-DH485 5–11 . . . . .
Appendix A
System Test General Specifications A–1 . . . . . . . . . . . . . . . . . . . . . .
Processor General Specifications A–2 . . . . . . . . . . . . . . . . . . . . . . .
Appendix B
Communicating on the
Ethernet Network
Using RS232-to-Ethernet

Channel-to-Channel
Passthru
Specifications
(Optional) Return
Processor to Initial Factory
Conditions