Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 39)

Rockwell Automation Publication 1609-UM007A-EN-P - January 2013 37
Bulletin 1609 UPS Management Software User Manual
Bottom Layer Buttons
Each button shows the respective information in the Information Area
Main:General Information about the UPS.
Tree: There are 2 sub-trees in the 1609 UPS Management tree: System
and UPS. The system tree is for host information and the status of Master/
Slave connection, the UPS tree is for all other UPS information.
Time:Displays the time for all schedules, battery replacement date and
countdown time.
Status: UPS status.
Diagram:Indicates the UPS current flow.
Scroll:UPS data graph.
Outlet:Displays outlet status. (If your UPS cannot control the outlet then
this button disappears)
Network:Indicates the connection of Master/Slave, 1609 UPS
Management Monitor and 1609 UPS Management Service.
Main UPS Health: 3 levels: Green, yellow and red.
UPS Type: On line, off line, line interactive or 3 phase on line.
UPS Model: The UPS model, which is being monitored by 1609 UPS
Management Software.
Firmware Version: Indicating the version status of the UPS internal code.
Host Name: The host, which runs 1609 UPS Management Software.
Rating VA: The UPS rating VA.