Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 19)

Rockwell Automation Publication 1609-UM007A-EN-P - January 2013 17
Bulletin 1609 UPS Management Software User Manual
Configuration
The Configuration Screen has a menu bar at the top with three main options:
Devices: This menu allows you to configure modem, pager and e-mail
applications.
UPS: The UPS menu allows you to plan and set the UPS schedule or
perform the Action...
Network: This menu allows you to choose the Master/Slave settings or
configure SNMP, HTTP functions.
Configuration Window UPS Communication Port: COM1, ... COM4, USB.
Next UPS Test Date/Time: The date of the next user-initiated UPS self
test. Setting from System->Configuration->UPS->Schedule.
Next UPS Shutdown Date/Time: This field displays the date of the next
shutdown the computer and UPS. Setting from System->Configuration-
>UPS->Schedule.
Next UPS Restart Date/Time: The date of the next restart UPS. Setting
from System->Configuration->UPS->Schedule.
Local Host IP: IP address of a computer, which runs 1609 UPS
Management Monitor.
1609 UPS Management Service Mode: 1609 UPS Management Service
acts as a Master or Slave.
Remote Host IP: The host, which runs 1609 UPS Management Service.
If 1609 UPS Management Monitor and 1609 UPS Management Service
runs on the same computer and this field will be empty.