Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 15)

Rockwell Automation Publication 1609-UM007A-EN-P - January 2013 13
Bulletin 1609 UPS Management Software User Manual
1609 UPS Management
Monitor operation The Main Screen has 7 areas that present information on the operating status of
your UPS. These areas are discussed in the following sections.
Host Selection: Press the combo box to select hosts that runs 1609 UPS
Management Software in the LAN. Users can monitor or control the UPS
remotely (password is needed).
Connection Indication: The logo will rotate while the communication
between 1609 UPS Management Monitor and 1609 UPS Management
Service is established.
Information Display: Press Bottom Layer Buttons to change the
information that is displayed in this area.
Recent Event Log: Preserve last 10 event logs in the combo box, click on
the combo box to pull down and view the logs.
Top Layer Buttons
These buttons are used to increase the speed of your operation, refer to the dialog
boxes in the menu.
Configuration: Same as the System-> Configuration in the menu.
Meters: Same as the View-> Meters in the menu.
Event Log: Same as the View-> Event Log in the menu.
History Graph: Same as the View-> History Graph in the menu.