Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 34)

32 Rockwell Automation Publication 1609-UM007A-EN-P - January 2013
Bulletin 1609 UPS Management Software User Manual
Turn Receptacle Relay On Turns the selected receptacle relay on. Each Receptacle Relay may control more
than one outlet, please see the rear panel of your UPS or the UPS hardware user's
manual.
Select a Receptacle Relay: Selects a receptacle relay.
Delay: Set the delay time to turn on the receptacle relay.
On: Executes the turn on command.
Turn Receptacle Relay Off Turns the receptacle relay off. Each Receptacle Relay may control more than one
outlet, please see the rear panel of your UPS or the UPS hardware user's manual.
Select a Receptacle Relay: Selects a receptacle relay.
Delay: Set the delay time to turn off the outlet group.
Off: Executes the turn off command.
UPS Audible Alarm On Enables the UPS buzzer. On the Bottom Layer Buttons press the Status button to
get the UPS buzzer status.
UPS Audible Alarm Off Mutes UPS buzzer alarm.
10 Seconds Test UPS switches to backup mode and the output power is supplied by the battery
for 10 seconds.
Deep Battery Test UPS switches to backup mode and output power is supplied by the battery until
the battery is low.
Cancel Test This menu allows you to stop test immediately.