Rockwell Automation 1609 UPS Management Software User Manual - Manual (Page 13)

Rockwell Automation Publication 1609-UM007A-EN-P - January 2013 11
Bulletin 1609 UPS Management Software User Manual
computers should be in Master mode; the others should be in Slave mode to
prevent them from sending contradictory commands.
When a power event occurs, the Master gets the information then transmits it to
Salve(s). Each 1609 UPS Management Service executes different "Actions"
(FlexEvent) so that the system manager can configure different strategies into
each different computer. For example: When a power failure occurs, the file
server and mail server won't shutdown until the UPS battery is low, but other less
important workstations execute shutdown after 5 minutes, and the initial
workstations shutdown after 10 minutes. Shutting down workstations preserves
more battery power for your mission critical network servers.
Remote Monitoring and
Control: 1609 UPS
Management Monitor 1609 UPS Management Monitor with the ability to monitor Local host and
Remote host.
You can run only 1609 UPS Management Monitor without running 1609 UPS
Management Service. 1609 UPS Management Monitor will search hosts in the
LAN(Local Area Network) which runs 1609 UPS Management Service in the
combo box. Click on the Host Selection combo box to list the searched hosts in