Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 4)

4 Rockwell Automation Publication 750-IN027C-EN-P - November 2013
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
CENTERLINE 2100 MCC
Approximate Dimensions Dimensions are in millimeters and (inches).
ATTENTION: De-energize all units before installing or removing.
When installing or removing MCC units, when possible, deenergize, lockout, and
tag-out all sources of power to the MCC.
ATTENTION: De-energize all power sources to the motor control center before
joining and splicing with the drive. Failure to de-energize all power sources can
result in severe injury or death. Using a voltmeter, verify that the MCC remote
power sources are disconnected.
2323
(91.5)
381
(15.0)
2285
(90.0)
127
(5.0)
127
(5.0)
2323
(91.5)
508
(20.0)
20-750-XSEC-RH-20G
20-750-XSEC-LH-20G
20-750-XSEC-BB-20G
2285
(90.0)