Rockwell Automation 445L GuardShield Micro 400 Safety Light Curtain User Manual - Manual (Page 36)

GuardShield™ Micro 400 Safety Light Curtain User Manual
34
R
Original instructions
Certificate
DOC EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorised representative established within the
Community
Rockwell Automation, Inc.
2 Executive Dr.
Chelmsford, MA 01824
USA Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products: GuardShield Micro400 Safety Light Curtains
Product identification (brand and
catalogue number/part number): Allen-Bradley / GuardShield 445L Series
(reference the attached list of catalogue numbers)
Product Safety Function Micro400 safety light curtains are Type 4 active opto-electronic protective devices
(AOPD) with resolutions of 14mm and 30mm. They are cascadeable, and can be
used in conjunction with MSR4x safety devices up to Safety Category 4 (EN 954-1)/
SIL3/SIL CL3 (EN 61508 / EN 62061) and PL e (EN ISO 13849-1).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the
installation instructions contained in the product documentation:
2006/42/EC
Machinery Directive
2004/108/EC EMC Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008
Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
IEC 61496-2:2006 Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular
requirements for equipment using active opto-electronic protective devices (AOPD’s)
EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
EN 61508 Parts 1-7:1998-2000 Functional safety of electrical/electronic/programmable electronic safety-related
systems
EN 954-1:1997 Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design
EN 50178:1997 Electronic equipment for use in power installations
EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic and
programmable electronic control systems
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – General requirements
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission
standard for industrial environments (Class A)
EN 61000-6-2:2005 Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery
Directive has been certified by:
TÜV Rheinland Product Safety GmbH
Am Grauen Stein
D-51105 Köln, Germany
EC Type Examination Certificate No:
968/M 205.00/08 & 968/M 205.00/09
Manufacturer: Authorised Representative in the Community:
Signature
Signature
Name: Daniel L. Nachtigall Name: Viktor Schiffer
Position: Supv – Product Certification Engineering Position: Engineering Manager
Date: 02-Mar-2011 Date: 08-Mar-2011