Yamato Scientific IM400W Shaking incubator - Manual (Page 8)

6
Before Use
Parts and Their Functions: Operation Panel
① Speed indicator Displays the shaking speed in tenths of the revolutions per minute.
② Speed control knob Used to increase and decrease the speed.
③ Lock knob Used to lock the speed control knob to prevent operation error.
④ Door safety lamp
Lit when the door safety function--to stop shaking if the door is
opened--is switched on.
⑤ Door safety key
Used to switch on/off the door safety function--to stop shaking if the
door is opened.
⑥ Run/stop key Used to start and stop shaking.
⑦ Defrost lamp Lit while defrosting.
⑧ Defrost key
Used to start/stop defrosting if the temperature cannot be regulated
during low-temperature operation.
⑨ Temperature set lamp Lit while the indicator displays the temperature setpoint.
⑩ Temperature set key Used when setting the temperature setpoint.
⑪ Heater lamp Lit while the heater is on.
⑫ Freezer lamp Lit while the freezer is operating.
⑬ Temperature indicator Displays the setpoint or current internal temperature.
⑭ Increment key Used to increment the set value.
⑮ Shift up key
Used to move the entry cursor (blinking) and set the entered value in
the microcomputer when setting the temperature setpoint.
⑯ Power switch Used to turn the power on/off.
①
⑥
② ③ ④ ⑤ ⑦ ⑧ ⑨ ⑩ ⑬ ⑭ ⑯
⑪ ⑫ ⑮