Yamato Scientific IM400W Shaking incubator - Manual (Page 17)

15
Operation
Placing Flasks
⑥ Attach the clamp ring in its correct position as shown in the figure below.
⑦ Attach rings to all the clamps including those with no flasks.
⑧ Place the tray on the table. Confirm that the tray fixing square-washers at the front and back properly fit the
grooves of the tray.
If improperly attached, the tray may slide off while shaking.
⑨ Hold the drawer handle and push the table in slowly. After completely pushing the table in, turn the handle
counterclockwise 90 degrees and swing it in.
⑩ The maximum allowable weight on the tray is 6 kg(f).
Tray fixing square-
washer
Tray fixing square-
washer
Drawer handle