Yamato Scientific IM400W Shaking incubator - Manual (Page 22)

20
Operation
Defrosting
① Operation at a low temperature for a long period causes the buildup of frost, which degrades the freezing
performance and may disable the temperature from being controlled at the setpoint. In such a case, use the
defrosting function.
② Press the defrost key ( ). The defrost lamp then lights up, the internal fan stops, and defrosting
starts.
③ Defrosting automatically stops in ten minutes. To stop defrosting before that, press the defrost key ( )
again.
④ The water from the defrosting will drain out through the drain hose. Provide an adequate-size pan at the end
of the hose.
⑤ The internal temperature rises while defrosting--be careful.
⑥ Defrosting does not stop the shaking.