beautypg.com

Basic installation – USG C2 Paired Compasso Channels User Manual

Page 4

background image

Page 4 of 12

Step 5

Position one side of the Paired C

OMPÄSSO

channels on the floor, following their part
identifications. Using the reference dimen-
sions on the drawing, align the Paired
C

OMPÄSSO

Channels with the hanger wire

locations.

Step 6

Transfer the hanger wire locations to
the top of the Paired C

OMPÄSSO

Channels.

These markings indicate where each
hanger bracket will be attached.

Step 7

Snap the first channel onto its corresponding
hanger brackets.

Tip: Start at an intersection; if there is
no intersection, start near the middle of
the assembly.

Installation
Instructions

Basic Installation