Trim-Tex Architectural Access Door Bead User Manual
Architectural access door bead, Installation instruction, Instrucciones de instalación

Architectural Access Door Bead
INC.
3700 W. Pratt Ave. Lincolnwood, IL 60712-2508 PH: (847) 679-3000 Fax: (847) 679-3017 www.trim-tex.com
Installation Instruction
The Mud on Architectural Access Door is the clean new way to finish any access
door. The new profile design creates a crisp look with a subtle / ” reveal that is
1 4
easy to install and finish.
To install, begin by cutting and dry fitting your bead to size. Attach the mud
leg to the drywall by spraying the bead and then the drywall with Trim-Tex
847 Spray Adhesive, then immediately apply to the drywall. Staple the mud
leg every 6" - 8" with ½" divergent staples. Next nail to stud or joist along the
mounting flange every 8" - 12". Finish the mud leg as you normally would by
mudding, sanding and painting.
• Designed for finishing drywall around access doors or light fixtures.
• Provides a flange for access door to rest on.
• Heavy wall PVC with a mud leg for easy finishing with a crisp & clean look
• In addition to the Architectural Access Door, hang your light fixture according
to manufacture’s recommendations.
LENGTH
10'
12
AS8020
Mounting
Flange
Access Panel or
Light Fixture
Mounting
Flange
Framing
Drywall
Compound
Access Door
Mud Leg
Architectural
Access Door
Light Fixture
Instrucciones de Instalación
El Mud-on Arquitectural Access Door es una nueva manera de acabar cualquier entrada de acceso. El nuevo perfil es diseñado
para producir una depresión lineal de ¼” y es fácil de instalar y acabar.
Para instalar, empiece cortando a asegurando que este a la medida. Sujete la extremidad a la tabla roca agregando el Adhesivo
en Aerosol 847 de Trim-Tex en el esquinero y en la tabla roca. Engrape la extremidad cada 6” a 8” con grapas de ½”. Clave la
extremidad para montar contra las vigas cada 8” - 12”. Acabe la extremidad con compuesto y después lije y pinte como lo haría
normalmente.
Diseñado para acabar tabla roca alrededor de lugares de acceso o los artefactos de iluminación.
Provee una extremidad para que repose el Access door.
PVC más grueso con una extremidad para un acabado más brillante.
Además del Access Door Arquitectural, cuelgue los artefactos de iluminación de acuerdo a las
recomendaciones del fabricante.