beautypg.com

Trim-Tex Buttboard User Manual

Drywall backer for flat butt joints, Call trim-tex today, Exclusive master distributor

background image

TM

Drywall Backer for Flat Butt Joints

PH: 800-874-2333

F

: 800-644-0216

AX

www.trim-tex.com [email protected]

ELIMINATES BUTT JOINT BULGES

Results in flat walls and ceilings

SAVES TIME AND MATERIAL HANGING

• Easier layout with butt joints between wall and

ceiling framing members

• Applicable for 12" - 16" - 24" o.c., metal or wood

framing members

• Requires no special tools or fasteners
• Use with any thickness drywall
• Ready to install lengths of 48" and 54"
• Facilitates usage of shorter drywall sheets
• Low Cost
• Made from OSB

FINISHES

• Finishes like factory edge
• Requires approximately half the mud, sanding and

finishing labor of standard butt joint.

• Flat butt joints reduce finish carpentry labor costs

and greatly improve quality

GREAT FOR REMODELING AND REPAIR

FRAMING

MEMBER

DRYWALL

SHEET #1

SCREWS

BUTTBOARD

BUTTBOARD

DRYWALL

SHEET #2

DRYWALL

SHEET #1

DRYWALL

SHEET #1

LENGTH

STOCK #

PCS/ BOX

DESCRIPTION

BUTTBOARD

12

825

48"

826

BUTTBOARD

54"

12

Available in skid quantities: 32 boxes/384 pieces

INSTALLATION INSTRUCTIONS

1. Install first sheet of drywall with butt end centered between
framing members. Install screws in surround of drywall
sheet, except for framing members closest to butt end.
2. Center BUTTBOARD

on backside of drywall butt joint

TM

with machined groove facing the backside of drywall. Install
screws every 8-12 inches, one inch back from drywall butt
edge.
3. Butt end of second drywall sheet to end of first sheet. (Do
not compress butt joint).

Install screws into surround of

drywall sheet except for framing member closest to butt joint.
4. Firmly push butt end of second sheet into BUTTBOARD

TM

and install screws every 8-12", one inch back from butt edge.
5. Finish screwing both sheets of drywall to framing
members.
6. Screws can also be installed through adjoining drywall
sheet into overlapping BUTTBOARD

TM

7. Tape and mud the butt joint. To improve the strength and
workability of your drywall compound, we recommend you
use Trim-Tex Mud-Max, stock # 850.

Call Trim-Tex Today !

Exclusive Master Distributor

LENGTH

STOCK #

PCS/ SKID

DESCRIPTION

BUTTBOARD

500

825S

48"

826S

BUTTBOARD

54"

500

Loose pieces in a skid.