Trim-Tex 350 Bull Arch User Manual
Bull arch, Cfigure 2 figure 2, Ab figure 1 figure 1
TT-206A
Available Sizes & Lengths
Stock #
Length
Pcs/box
35028
35020
8'
10'
25
25
Product Overview
Trim-Tex 350 Bull Arch is the ultimate bead for finishing
archways and the perfect complement to "The Worlds
Strongest Bead" our 350 Bull. Unique coextruded design
eliminates notches in the exposed area of the bead and
allows 350 Bull Arch to finish archways ranging from a
15" inside to a 24" outside radius. Be sure to check the
Trim-Tex catalog and www.trim-tex.com for all our
innovative products.
Bull Arch
INC.
C
Figure 2
Figure 2
350 Bull Arch
Installation Instructions
D R Y WA L L
P R O D U C T S
A
B
Figure 1
Figure 1
Mud
Leg
Mud
Leg
Tabs
Installation Instructions
1. Please read the entire instructions before beginning.
When matching up 350 Bull Arch to our 350 Bull Bead,
align the 2 beads as shown in Figure 1. It is important that
edge A lines up on the 350 Bull Arch and the 350 Bull.
Don't worry about the apparent void by edge B. This area is
flat on the 350 Bull and will blend together when you apply
joint compound. The 350 Bull Arch had to be designed
narrower at this point so it flexes into an arch more easily.
2. If 350 Bull Arch will be joining directly into an 0921 or
0923 3 Way, the tab on the 3 Way will need to be snipped
as shown in Figure 2, C.
3. To install
, dry fit the bead. Then apply 2
coats of Trim-Tex 847 Spray Adhesive to the drywall.
Immediately apply the
to the drywall while
the spray is still wet. This will allow you to reposition the
bead. If the adhesive dries and there is no tack to it, you
will need to respray the drywall. Once in position, use the
Trim-Tex Installation Tool or the handle of your taping
knife to pressure the mud leg and the tabs to the drywall.
(A FREE tool is included with every purchase of 847 Spray
Adhesive.) Staple the mud legs every 6" and staple the tabs
minimum every 4”. We recommend stapling every tab for
the ultimate adhesion. After stapling, apply pressure to the
mud leg and tabs once more.
4. Mud as usual. Be sure to use All-Purpose or Multi-
Purpose Compound. Do not use Fast Setting Compounds.
Be careful not to oversand the final coat of mud. Prime and
paint as usual.
350 Bull Arch
350 Bull Arch